A CUSTOM SOLUTION FOR YOUR ORGANIZATION
StaffAlerter Base
The StaffAlerter Base system can be configured to accommodate a large number of input or output connections and can be either one or more wall mount or rack mount unit. The StaffAlerer Base system provides a power supply, battery backup, and processor that can be scaled depending upon the application requirements. The unit can be wired or wireless and can support up to seven boards per processor to meet your needs.
ADDITIONAL INPUT / OUTPUT DEVICES
Contact Notifier
Provides temperature monitoring of on-premise locations or the ability to connect up to four relays and four inputs to on-premise devices to provide control or monitoring capabilities.
SA-Alert
Provides audible and visual notification when an event takes place. With a blue-white strobe light and a siren greater than 100db, these devices can be placed in a facility to provide immediate notification during an event.
VIS-A-Ring Speaker
Provides audible and visual notifications when an event takes place. With a blue-white strobe light and a speaker, these devices can be placed in a facility to provide immediate custom announcement notification during an event.
PA2 SIP Amplifier
Connects to an existing phone system via SIP and connects to an existing paging system via an audio-in port to provide custom announcement notification during an event. If the existing phone system cannot provide a secure inbound phone number, the PA2 can also have a secure SIP trunk added to the device to allow for only certain inbound callers to be able to reach this device. This secure prevents any malicious or telemarketing calls from coming across your paging system.
StaffAlerter SmartBoard
The StaffAlerter SmartBoard is an ultra low power device that can be battery-powered or powered via an optional 5v power supply. The SmartBoard provides connections for up to three inputs or two outputs when connected to consistent power. When operating on battery it wakes up when a state has changed on the sensor input and sends a notification to StaffAlerter.
Emergency Break Glass Box
The Emergency Break Glass box can be either wired or with the addition of the SA-SmartBoard be made wireless for easy installation anywhere in a facility. Available in blue or yellow the Emergency Break Glass box provides a one-time use call for assistance and can send pre-defined location information to first responders upon activation. By using a key the device can be tested based upon customer requirements without breaking the glass. Replacement glass is available for purchase.
Push Button
The Push Button can be either wired or with the addition of the SA-SmartBoard be made wireless for easy installation anywhere in a facility. The Push Button is available in blue or yellow with a momentary or latching button an optional custom label is available for purchase depending upon the customer requirements (Shown with custom “Emergency” label). An optional button cover can be added to prevent accidental activations of the unit. The Push Button provides a simple way to call for assistance and can send pre-defined location information or custom message upon activation. The Push Button can also be used to signal for assistance at doors, departments, or trigger additional actions on the StaffAlerter system.
Lockdown Button
The Lockdown Button can be either wired or with the addition of the SA-SmartBoard be made wireless for easy installation anywhere in a facility. The Lockdown Button is available in blue, yellow, red, or white with a latching button with a key release. The Lockdown Button provides a simple way to call for assistance and can send pre-defined location information or custom message upon activation to first responders or designated personnel. The Lockdown Button can also be used to trigger additional actions on the StaffAlerter system such as closing fire doors, locking all exterior doors from outside threats, disabling the fire alarm panel (where allowed), and activating sirens or strobe lights.
Threat Extinguisher
StaffAlerter has partnered with Threat Extinguisher to provide a way for building occupants to fight back when other protocols end and escape or evacuation is not possible. Utilizing a gel pepper spray with a range of 20+ feet and a rating of 5,000,000 units on the Scoville Scale. The Threat Extinguisher provides an easy-to-use and effective way to disable, delay, or stop an attacker giving the user a chance at escape and saving lives. Upon removal from the Threat Extinguisher base the unit connects to StaffAlerter sending location and additional information to first responders or designated personnel. Removal of the Threat Extinguisher canister can also trigger additional actions on the StaffAlerter system such as closing fire doors, locking all exterior doors from outside threats, disabling the fire alarm panel (where allowed), and activating sirens or strobe lights.
